Grid Power Quality Enhancement Using Fuzzy Control-Based Shunt Active Filtering

Active filtering has proved efficient for the mitigation of harmonics in distribution grids. This paper deals with the design of fuzzy control strategies for a three-phase shunt active filter to enhance the power quality via the regulation of the DC bus voltage of the distribution network. The proposed control scheme is based on Interval Type 2 Fuzzy Logic controller. A simulation study is performed under Simulink/Matlab to evaluate the performance and robustness of the proposed control schemePeer reviewedFinal Accepted Versio

Embedded Trusted Monitoring and Management Modules for Smart Solar Panels

This paper investigates developing a prototype of smart solar panels. This architecture consists of a panel monitoring module and the central management unit. The monitoring module is to be embedded inside each PV panel making it secure to transfer the trusted data via Wi-Fi to the central Management unit (which can accommodate an array of PV panels in an installation). This module is required for data storage and provides the ability to upload secure data to the cloud. This platform presents the ability to securely manage large numbers of rooftop solar panels in a distributed ledger by implementing block chain algorithm. For achieving this purpose, Module 400 is envisaged to be turned into a Blockchain node as it provides the infrastructure to implement this technology

Energy regeneration from suspension dynamic modes and self-powered actuation

Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.This paper concerns energy harvesting from vehicle suspension systems. The generated power associated with bounce, pitch and roll modes of vehicle dynamics is determined through analysis. The potential values of power generation from these three modes are calculated. Next, experiments are carried out using a vehicle with a four jack shaker rig to validate the analytical values of potential power harvest. For the considered vehicle, maximum theoretical power values of 1.1kW, 0.88kW and 0.97kW are associated with the bounce, pitch and roll modes, respectively, at 20 Hz excitation frequency and peak to peak displacement amplitude of 5 mm at each wheel, as applied by the shaker. The corresponding experimentally power values are 0.98kW, 0.74kW and 0.78kW. An experimental rig is also developed to study the behavior of regenerative actuators in generating electrical power from kinetic energy. This rig represents a quarter-vehicle suspension model where the viscous damper in the shock absorber system is replaced by a regenerative system. The rig is able to demonstrate the actual electrical power that can be harvested using a regenerative system. The concept of self-powered actuation using the harvested energy from suspension is discussed with regard to applications of self-powered vibration control. The effect of suspension energy regeneration on ride comfort and road handling is presented in conjunction with energy harvesting associated with random road excitations.Peer reviewedFinal Accepted Versio

Proceedings of Abstracts Engineering and Computer Science Research Conference 2019

© 2019 The Author(s). This is an open-access work distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. For further details please see https://creativecommons.org/licenses/by/4.0/. Note: Keynote: Fluorescence visualisation to evaluate effectiveness of personal protective equipment for infection control is © 2019 Crown copyright and so is licensed under the Open Government Licence v3.0. Under this licence users are permitted to copy, publish, distribute and transmit the Information; adapt the Information; exploit the Information commercially and non-commercially for example, by combining it with other Information, or by including it in your own product or application. Where you do any of the above you must acknowledge the source of the Information in your product or application by including or linking to any attribution statement specified by the Information Provider(s) and, where possible, provide a link to this licence: http://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/This book is the record of abstracts submitted and accepted for presentation at the Inaugural Engineering and Computer Science Research Conference held 17th April 2019 at the University of Hertfordshire, Hatfield, UK. This conference is a local event aiming at bringing together the research students, staff and eminent external guests to celebrate Engineering and Computer Science Research at the University of Hertfordshire. The ECS Research Conference aims to showcase the broad landscape of research taking place in the School of Engineering and Computer Science. The 2019 conference was articulated around three topical cross-disciplinary themes: Make and Preserve the Future; Connect the People and Cities; and Protect and Care

Energy Storage Optimisation in an Electric Power Grid

Energy storage is an essential part of energy supply to consumer demand from the grid. It plays a strategic role in the future development of flexible and reliable electricity systems. Energy storage systems allow excess of generation from the grid to be stored for later usage therefore ensuring an efficient network, particularly as back-up power support following an outage in the distribution network. The variability of renewable energy resources are difficult to predict consequently causing several negative impacts on the electric grid. Inconsistency of renewable energy is presently dealt with by ramping conventional reserves up and down based on consumer demand but predominantly by weather forecasts. However, as the penetration level of renewable energy increases, conventional reserve compensation will no longer be appropriate without energy storage units capable of rapidly responding to the power fluctuations within the network to maintain system stability. This research project demonstrates the potential benefits of optimised positioning of energy storage systems in order to manage the growing deployment of intermittent generation by solving these issues in providing electricity where and when required. A simulation study is presented using OpenDSS interfaced with MATLAB software. The distribution model used in the co-simulation is the ‘13Bus’ circuit from the ‘IEEETestCases’ examples. This circuit model was used to demonstrate how singular and multiple batteries based on determined geographical locations can reduce the instability of a PV generator, peak-shave during high-demand hours and smooth the power flow within the network. The results demonstrate the effectiveness of the proposed energy storage positioning strategy in enhancing the stability and reliability of the grid.Peer reviewe

Real-time DSP-based Edge Detection Techniques for License Plate Detection : A Comparative Study

Peer reviewe

Aeroelastic vibration control of hybrid airships using Regenerative Actuators

In this paper, an experiment is performed to investigate aeroelastic vibration control of a wing using regenerative piezoelectric actuators. Instead of the wing a plate with one pair of the piezoelectric actuator is used to study the effect of the vibrations. The model consists of the rectangular steel modelled in the cantilever configuration with the surface bonded with piezoelectric actuators. The regenerative actuators is used in the cantilever beam to harvest electrical power from the vibratory motion or provide an anti-vibratory control motion to cancel out the undesirable vibration in the cantilever beam

Technology and Applications of Wide Bandgap Semiconductor Materials: Current State and Future Trends

© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).Silicon (Si)-based semiconductor devices have long dominated the power electronics industry and are used in almost every application involving power conversion. Examples of these include metal-oxide-semiconductor field-effect transistors (MOSFETs), insulated-gate bipolar transistors (IGBTs), gate turn-off (GTO), thyristors, and bipolar junction transistor (BJTs). However, for many applications, power device requirements such as higher blocking voltage capability, higher switching frequencies, lower switching losses, higher temperature withstand, higher power density in power converters, and enhanced efficiency and reliability have reached a stage where the present Si-based power devices cannot cope with the growing demand and would usually require large, costly cooling systems and output filters to meet the requirements of the application. Wide bandgap (WBG) power semiconductor materials such as silicon carbide (SiC), gallium nitride (GaN), and diamond (Dia) have recently emerged in the commercial market, with superior material properties that promise substantial performance improvements and are expected to gradually replace the traditional Si-based devices in various power electronics applications. WBG power devices can significantly improve the efficiency of power electronic converters by reducing losses and making power conversion devices smaller in size and weight. The aim of this paper is to highlight the technical and market potential of WBG semiconductors. A detailed short-term and long-term analysis is presented in terms of cost, energy impact, size, and efficiency improvement in various applications, including motor drives, automotive, data centres, aerospace, power systems, distributed energy systems, and consumer electronics. In addition, the paper highlights the benefits of WBG semiconductors in power conversion applications by considering the current and future market trends.Peer reviewe